Problemas con Sony Trinitron.

4-3. TEST MODE 2:
Is available by pressing the Test button twice, OSD “TT” appears. The functions described below are available by pressing the two numbers. To release Test Mode 2, press 0, 10, 20 ... twice or switch the TV into Standby Mode. Pressing the two Local Control buttons ( + and – ) during Power ON will also switch into "TT" mode.
In TT mode, it is possible to remove the Menu from the screen by pressing the Speaker Off button once. Pressing the Speaker OFF button a second time will cause the menu to reappear . The Function is kept even when the menu is not displayed!!
00 Switch back to normal mode - TT mode off
01 Switch service menu on
02 Direct access to Noise reduction
03 Set volume to 30%
04 Service menu in "Service Mode"
05 Service menu in "Production Mode"
06 Set Volume to 80%
07 Aging Mode
08 Shipping Condition
09 Language Reset
10 The TT number will be deleted
11 Direct access to Balance
12 Direct access to Hue
13 Display of TV set configuration
14 Production Info Display
15 Read Analog from ROM
16 Save Analog F in NVM
17
This function presets the Labels for the AV sources:
AV1, RGB, AV2, YC2, AV3, YC3, AV4, YC4.
18 No function
19 No function
20 See TT10
21 Picture Rotation automatic function: (-4) -> (+4) -> 0
22 Error Monitor Display
23 Direct access to Sub Brightness Adjustment.
24 Direct access to Sub Colour.
25 Status Menu Display
26 Text Character selection (Char set 06 -> West Europe)
27 Text Character selection (Char set 38 -> East Europe)
28
Text Character selection (Char set 40 -> West Europe)
US English
29
Text Character selection (Char set55 -> West Europe)
Turkish
30 See TT10
31 no function
32 no function
33 no function
34 no function
35 no function
36 no function
37 no function
38 Screen Position
39 Reset Programme Table
40 See TT10
41 Picture Min
42 no function
43 no function
44 no function
45 Set NVM to Protect mode
46
IR Channel Pressetting Mode. The channel pressetting
can be done by a Special transmitter.
Sequence: TT46 -> --PR Number select display appears
Select Prog. No. from where the channel shall
be stored.
--> Now TV is waiting for IR sequence <--
--> If no IR transmission starts TT46 is
released after 20 secs <--! Note: when TT46 is active,
any transmission will be interpreted as PROG data !
47 no function
48 no function
49 New Initialize
50 See TT10
51 Strobo mode is activated.
52 no function
53 no function
54
Direct access to Velocity Modulation VM (Production
use)
55 Slicer High
56 Slicer No
57 Megatext Service Menu on
58 MTX Small Framing Code Window
59 MTX Wide Framing Code Window
60 See TT10
61 no function
62 no function
63 no function
64 Reset all IIC Slave commands (Production use)
65 Reset stored error codes in NVM
66 Feature box and Pal Plus
67 no function
68 Ignore Errors - on
69 Ignore errors - off
70 See TT10
71 no function
72 no function
73 Megatext RGB textlevel one step decreased.
74
Megatext RGB textlevel one step decreased (max 1
steps down starting from E0h) (Production use)
75 no function
76 CDA9360
77 SDA9280
78 PIP
79 no function
80 See TT10
81 S87C654 Default data setting
82 TDA9170 Default data setting
83 SAA 7185WP Default data setting
84 TDA4780 Default data setting
85 TDA9144 Default data setting
86 TDA9143 Default data setting
87 SDA9288 Default data setting
88 Char set Russian
89 Char set Russian (esc)
90 See TT10