The difficulty level is in our opinion acceptable - on a scale of 1-10, where 1 is putting two lego blocks together and 10 is building a car engine from scratch, we'd put this somewhere around a 4. Anyone who has ever installed a mod chip into a gaming system will have no problem with this modification.
) No, no es RETROiluminacion, los moviles tipo Nokia 8210 (modernos) tampoco la tienen. Es iluminacion lateral, no te confundas.
Extraido del FAQ de Portable Monopoly
While most of the parts for this kit can be purchased at your local Radio Shack, the most important component cannot. Without getting too technical, this component is a flat, transparent light source that sits directly on top of the system's LCD (and under the plastic screen cover). It must be custom designed with an obscene amount of precision to work well, and manufactured in large quantities for acceptable per-unit pricing. We are prepared to take the responsibility of investing in large amounts of these custom units.
We get a lot of emails insinuating that the same could be done with a few LED's placed inside the system. This is simply not the case. Without going into the engineering difficulties of this project in too much depth, LED bulbs are not capable of diffusing the light evenly over the entire surface of the screen. If you want to see this for yourself, open up your system and place a Wormlight right next to the screen. Not even 10% of it will be illuminated.
Originalmente enviado por camposi
yo de vosotros me esperaria un tienpezillo antes e pillarlo..... una vez salio m refiero
Originalmente enviado por Dyne
pos yo ke vosotros, abria el 3310 y le metia las lucesillas verdes alrededor a toda la gba, y una linterna pegada con cinta aislante, y luego lo vendais como la GBA del futuro, y os hagais lammers de profesion, y os ganeis la vida de este modo.
sorry xDD 
Extraido del FAQ de Portablemonopoly
We get a lot of emails insinuating that the same could be done with a few LED's placed inside the system. This is simply not the case. Without going into the engineering difficulties of this project in too much depth, LED bulbs are not capable of diffusing the light evenly over the entire surface of the screen. If you want to see this for yourself, open up your system and place a Wormlight right next to the screen. Not even 10% of it will be illuminated.
Originalmente enviado por maesebit
Es que no hablais ingles?
Como bien dicen en Portablemonopoly si tratas de retroiluminar la GBA con leds lo que te pasa es que el centro de la pantalla se queda sin iluminacion. ¿Para que quieres iluminar solo los bordes de la pantalla?
Es que no es lo mismo iluminar una pantalla monocromatica de 4x3 cm que una pantalla a color 4 veces mas grande.
Ademas, los leds no caben en los bordes de la pantalla de la GBA
La GBA no se puede retroiluminar con luz led y punto.
A ver, lo pondre otra vez a ver si ahora lo leeis mas despacio
Es que no hablais ingles?
Porque lo son:no se porque algunos os empeñais en decir que son leds cuando lo que esta claro es que no lo son
The LED's in the light guide don't burn out for many, many thousands of hours, nor do they create heat.
)
We get a lot of emails insinuating that the same could be done with a few LED's placed inside the system. This is simply not the case. Without going into the engineering difficulties of this project in too much depth, LED bulbs are not capable of diffusing the light evenly over the entire surface of the screen
Si es "luz LED", proviene de un DIODO LED
Lo que cambiara son las especificaciones y formato.
We get a lot of emails insinuating that the same could be done with a few LED's placed inside the system. This is simply not the case. Without going into the engineering difficulties of this project in too much depth, LED bulbs are not capable of diffusing the light evenly over the entire surface of the screen
..... 