mira tendras ke hacer lo ke pone en este tutorial...
http://ps3wiki.qj.net/index.php/YDL_on_SDTV
ahora tendrias que instalar el xauto config salu2
edito:
* Now to get a GUI environment, you will need to do a couple more steps. Download Xautoconfig using the command below.
wget
http://www.terrasoftsolutions.com/support/solutions/ydl_5.0/Xautoconfig-0.23-2.ydl.2.ppc.rpm
* Once you have the file, install it using:
rpm -ivh Xautoconfig-0.23-2.ydl.2.ppc.rpm
* Now run Xautoconfig by typing it at the command prompt.
Xautoconfig
* We're almost done. Now type the following command:
editdiff /etc/inittab
* This will edit the /etc/inittab file. Scroll down using the arrow keys and find the line:
id:3:initdefault:
* Push i to get into edit mode. Then change the line to:
id:5:initdefault:
* Now press the ESC key and type:
:exit
* Now edit the file /etc/kboot.conf
editdiff /etc/kboot.conf
* Find the line that reads:
default=ydl
* Change it to:
default=ydl480i
* Once done, just press ESC and type :exit
* Now uncomment the YUM base repositories line in /etc/yum.repos.d/
Congratulations! You have successfully installed Yellow Dog Linux for your SDTV. Type:
reboot
This will reboot your PS3 and bring you to the kboot prompt. Enter the username and password to log into YDL with a GUI.
eso es lo que tienes que hacer con un cable de red conectado para instalarte el xauto...
