Firma con problemas:
Nombre del evento de problema: BlueScreen
Versión del sistema operativo: 6.0.6002.2.2.0.768.3
Id. de configuración regional: 1034
Información adicional del problema:
BCCode: 77
BCP1: 00000001
BCP2: FFFBFAF8
BCP3: 00000000
BCP4: 88D53C70
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Archivos que ayudan a describir el problema:
C:\Windows\Minidump\Mini091211-01.dmp
C:\Users\Usuario\AppData\Local\Temp\WER-93741-0.sysdata.xml
C:\Users\Usuario\AppData\Local\Temp\WER9137.tmp.version.txt
Lea nuestra declaración de privacidad:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0c0a
Stop 0x00000077 or KERNEL_STACK_INPAGE_ERROR
The Stop 0x77 message indicates that a page of kernel data requested from the paging (virtual memory) file could not be found or read into memory. This Stop message can also indicate disk hardware failure, disk data corruption, or possible virus infection.
Possible Resolutions:
• Stop 0x77 messages can be caused by bad sectors in the virtual memory paging file or a disk controller error. In extremely rare cases, depleted nonpaged pool resources can cause this error. If the first and third parameters are zero, the stack signature in the kernel stack is missing, which is an error typically caused by defective hardware. If the I/O status is 0xC0000185 and the paging file is on a SCSI disk, check for cabling and termination issues. An I/O status code of 0xC000009C or 0xC000016A indicates that the requested data could not be found. You can try to correct this by restarting the computer. If a problem with disk integrity exists, Autochk, a program that attempts to mark bad disk sectors as defective so that they are not used in the future, starts automatically. If Autochk fails to run, you can manually perform the integrity check yourself by following the instructions to run Chkdsk provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.
• Another cause of Stop 0x77 messages is defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.
• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.
• Problems that cause Stop 0x77 messages can also cause Stop 0x7A messages. For more information about Stop 0x7A messages, see "Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR" later in this list.
elj0ven escribió:yo tube un problema similar,y se me solucionó con un formateo. Eso sí,tube que bajarme un windows,formatear con la utilidad de windows para hacerlo,y a partir de ahí volver a instalar con mi disco de recuperación,porque con este el problema no se me solucionaba,a pesar de que decía que el proceso formatearía mi disco. Mi portátil es un acer.
JuananBow escribió:Vale, usas Windows Vista Service Pack 2 y el código de error es 0x77:KERNEL_STACK_INPAGE_ERROR si mal no me equivoco. ¿no?
Según he podido encontrar, el error 0x77 suele producirse por sectores defectuosos en el archivo de paginación del Windows, generalmente derivados de sectores defectuosos en el disco duro. También puede deberse a un posible virus o a un fallo en la memoria RAM del ordenador. Y en última instancia, a un fallo en la placa.
En mi opinión, prueba a pasarle primero un test de memoria y si no sale nada, pásale después un checkeo completo al disco duro donde tengas el Windows: Disco Duro > Botón Derecho > Propiedades > Ficha Herramientas > Comprobación de Errores > Comprobar ahora > Activa las dos casillas e inicia el proceso; te dirá que no puede comprobar ahora el disco pero que programará un checkeo al próximo reinicio.
Esto no significa necesariamente que el disco esté jodido, sólo significa que tienes un sector defectuoso, pero a lo mejor te puede dar problemas. Si la memoria de da fallo, entonces si que tendrás que desembolsar para una nueva.Stop 0x00000077 or KERNEL_STACK_INPAGE_ERROR
The Stop 0x77 message indicates that a page of kernel data requested from the paging (virtual memory) file could not be found or read into memory. This Stop message can also indicate disk hardware failure, disk data corruption, or possible virus infection.
Possible Resolutions:
• Stop 0x77 messages can be caused by bad sectors in the virtual memory paging file or a disk controller error. In extremely rare cases, depleted nonpaged pool resources can cause this error. If the first and third parameters are zero, the stack signature in the kernel stack is missing, which is an error typically caused by defective hardware. If the I/O status is 0xC0000185 and the paging file is on a SCSI disk, check for cabling and termination issues. An I/O status code of 0xC000009C or 0xC000016A indicates that the requested data could not be found. You can try to correct this by restarting the computer. If a problem with disk integrity exists, Autochk, a program that attempts to mark bad disk sectors as defective so that they are not used in the future, starts automatically. If Autochk fails to run, you can manually perform the integrity check yourself by following the instructions to run Chkdsk provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.
• Another cause of Stop 0x77 messages is defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.
• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.
• Problems that cause Stop 0x77 messages can also cause Stop 0x7A messages. For more information about Stop 0x7A messages, see "Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR" later in this list.
