No puedo cambiar resolución de pantalla en debian

Question

No puedo cambiar resolución de pantalla en debian

canjaume 30 may 2017 14:56

Novato

11 mensajes
desde may 2017

Hola,
no puedo cambiar resolución de pantalla

Gestor de escritorio es ubuntu
Distro Debian GNU/Linux 8 (jessie) 64-bit
Grafica Gallium 0.4 on llvmpipe (LLVM 3.5, 256 bits)

El comando xrandr sólo me da para 1024 x 768 y la mia es 1920 1080

:~$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 76.00*
:~$ lspci
00:00.0 Host bridge: Intel Corporation Device 591f (rev 05)
00:02.0 VGA compatible controller: Intel Corporation Device 5912 (rev 04)
00:14.0 USB controller: Intel Corporation Device a2af
00:16.0 Communication controller: Intel Corporation Device a2ba
00:17.0 SATA controller: Intel Corporation Device a282
00:1b.0 PCI bridge: Intel Corporation Device a2e7 (rev f0)
00:1c.0 PCI bridge: Intel Corporation Device a290 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Device a298 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a2c5
00:1f.2 Memory controller: Intel Corporation Device a2a1
00:1f.3 Audio device: Intel Corporation Device a2f0
00:1f.4 SMBus: Intel Corporation Device a2a3
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V

Con cvt me sale mi resolución
:~# cvt 1920 1080
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync

Siquiendo este tutorial http://bit.ly/2qUrNbf al crear el xorg.conf i reiniciar me quede sin X al eliminarlo me volvierón las Xs

Alguna sugerencia....
Gracias de antemano!

22 respuestas

Answer 1 · 2017-05-30T13:46:24+00:00

A mi me paso algo parecido y era problema del EDID del monitor que se había dañado.

Tienes dos opciones para tratar de solucionarlo si es problema del EDID:

- Una de ella es tratar de conseguir el EDID de tu monitor (o alguno genérico) para posteriormente cargarlo al arranque del sistema y este pueda detectar correctamente la resolución de tu monitor.

- La segunda opción es tratar de reparar el EDID del monitor, esta es la mejor opción, ya el cambio es permanente y no tienes que estar configurando nada en el arranque del sistema como la anterior solución (te dejo el siguiente vídeo con el cual pude reparar el EDID).

Saludos.

canjaume 30 may 2017 18:10 Novato 11 mensajes desde **may 2017** · Answer 2 · 2017-05-30T16:10:00+00:00

Hola _Slash_,
tengo en la misma maquina un win 10 y la resolución se ve perfecta 1920x1080. No es problema de monitor! mi debian 8.8
Gracias por contestar

Answer 3 · 2017-05-30T16:59:06+00:00

Que se vea bien en otro sistema operativo no quiere decir que no este dañado el EDID, en mi caso se veían bien en Windows y Mac OS, pero en Debian no me dejaba cambiar la resolución, me lleve un día entero en encontrar una solución porque son muy pocas personas a las que les presenta el fallo del EDID.

Saludos.

canjaume 30 may 2017 19:47 Novato 11 mensajes desde **may 2017** · Answer 4 · 2017-05-30T17:47:01+00:00

Tengo otra maquina con un win 7pro y debian 8 y provandola con el mismo monitor se ve la resolución 1920x1080 http://nerea.cat/imatges/sony72.png

Answer 5 · 2017-05-30T18:02:08+00:00

Darumo 30 may 2017 20:02

MegaAdicto!!!

13.799 mensajes
desde nov 2004
en Málaga

Kernel y mesa muy viejos?

canjaume 30 may 2017 20:34 Novato 11 mensajes desde **may 2017** · Answer 6 · 2017-05-30T18:34:17+00:00

No se si sera viejo o demasiado joven...
:~# cat /etc/*-release
PRETTY_NAME="Debian GNU/Linux 8 (jessie)"
NAME="Debian GNU/Linux"
VERSION_ID="8"
VERSION="8 (jessie)"
ID=debian
HOME_URL="http://www.debian.org/"
SUPPORT_URL="http://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"
:~# uname -mrs
Linux 3.16.0-4-amd64 x86_64

Perdón no entendi: La mesa?

Answer 7 · 2017-05-31T01:29:24+00:00

Publica el log de tu Xorg para ver si hay algún error que nos pueda ayudar a localizar el problema.

canjaume 31 may 2017 10:05 Novato 11 mensajes desde **may 2017** · Answer 8 · 2017-05-31T08:05:47+00:00

Esta es mi /var/log/Xorg.0.log de hoy mismo

[ 2.350]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2.350] X Protocol Version 11, Revision 0
[ 2.350] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2.350] Current Operating System: Linux nompc 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2 (2017-04-30) x86_64
[ 2.350] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=439109ac-2938-4e2e-9057-35e5455d5353 ro quiet
[ 2.350] Build Date: 11 February 2015 12:32:02AM
[ 2.350] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 2.350] Current version of pixman: 0.32.6
[ 2.350] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.350] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.350] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 31 09:39:11 2017
[ 2.351] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.352] (==) No Layout section. Using the first Screen section.
[ 2.352] (==) No screen section available. Using defaults.
[ 2.352] (**) |-->Screen "Default Screen Section" (0)
[ 2.353] (**) | |-->Monitor "<default monitor>"
[ 2.353] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.353] (==) Automatically adding devices
[ 2.353] (==) Automatically enabling devices
[ 2.353] (==) Automatically adding GPU devices
[ 2.358] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 2.358] Entry deleted from font path.
[ 2.362] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 2.362] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.362] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.363] (II) Loader magic: 0x55587891bd80
[ 2.363] (II) Module ABI versions:
[ 2.363] X.Org ANSI C Emulation: 0.4
[ 2.363] X.Org Video Driver: 18.0
[ 2.363] X.Org XInput driver : 21.0
[ 2.363] X.Org Server Extension : 8.0
[ 2.364] (--) PCI:*(0:0:2:0) 8086:5912:1043:8694 rev 4, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 2.364] (II) LoadModule: "glx"
[ 2.365] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.375] (II) Module glx: vendor="X.Org Foundation"
[ 2.375] compiled for 1.16.4, module version = 1.0.0
[ 2.375] ABI class: X.Org Server Extension, version 8.0
[ 2.375] (==) AIGLX enabled
[ 2.375] (==) Matched intel as autoconfigured driver 0
[ 2.375] (==) Matched modesetting as autoconfigured driver 1
[ 2.375] (==) Matched fbdev as autoconfigured driver 2
[ 2.375] (==) Matched vesa as autoconfigured driver 3
[ 2.375] (==) Assigned the driver to the xf86ConfigLayout
[ 2.375] (II) LoadModule: "intel"
[ 2.377] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 2.380] (II) Module intel: vendor="X.Org Foundation"
[ 2.380] compiled for 1.16.4, module version = 2.99.917
[ 2.380] Module class: X.Org Video Driver
[ 2.380] ABI class: X.Org Video Driver, version 18.0
[ 2.380] (II) LoadModule: "modesetting"
[ 2.381] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2.381] (II) Module modesetting: vendor="X.Org Foundation"
[ 2.381] compiled for 1.16.4, module version = 0.9.0
[ 2.381] Module class: X.Org Video Driver
[ 2.381] ABI class: X.Org Video Driver, version 18.0
[ 2.381] (II) LoadModule: "fbdev"
[ 2.382] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2.382] (II) Module fbdev: vendor="X.Org Foundation"
[ 2.382] compiled for 1.15.99.904, module version = 0.4.4
[ 2.382] Module class: X.Org Video Driver
[ 2.382] ABI class: X.Org Video Driver, version 18.0
[ 2.382] (II) LoadModule: "vesa"
[ 2.382] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2.383] (II) Module vesa: vendor="X.Org Foundation"
[ 2.383] compiled for 1.15.99.904, module version = 2.3.3
[ 2.383] Module class: X.Org Video Driver
[ 2.383] ABI class: X.Org Video Driver, version 18.0
[ 2.383] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 2.383] (II) intel: Driver for Intel(R) HD Graphics
[ 2.383] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 2.383] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 2.383] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2.383] (II) FBDEV: driver for framebuffer: fbdev
[ 2.383] (II) VESA: driver for VESA chipsets: vesa
[ 2.383] (++) using VT number 7

[ 2.405] (EE) open /dev/dri/card0: No such file or directory
[ 2.405] (WW) Falling back to old probe method for modesetting
[ 2.406] (EE) open /dev/dri/card0: No such file or directory
[ 2.406] (II) Loading sub module "fbdevhw"
[ 2.406] (II) LoadModule: "fbdevhw"
[ 2.406] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2.406] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2.406] compiled for 1.16.4, module version = 0.0.2
[ 2.406] ABI class: X.Org Video Driver, version 18.0
[ 2.406] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[ 2.406] (II) FBDEV(1): using default device
[ 2.406] (WW) Falling back to old probe method for vesa
[ 2.406] (EE) Screen 0 deleted because of no matching config section.
[ 2.406] (II) UnloadModule: "modesetting"
[ 2.406] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.407] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 2.407] (==) FBDEV(0): RGB weight 888
[ 2.407] (==) FBDEV(0): Default visual is TrueColor
[ 2.407] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.407] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
[ 2.407] (II) FBDEV(0): checking modes against framebuffer device...
[ 2.407] (II) FBDEV(0): checking modes against monitor...
[ 2.407] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 2.407] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 2.407] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 2.407] (==) FBDEV(0): DPI set to (96, 96)
[ 2.407] (II) Loading sub module "fb"
[ 2.407] (II) LoadModule: "fb"
[ 2.407] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.408] (II) Module fb: vendor="X.Org Foundation"
[ 2.408] compiled for 1.16.4, module version = 1.0.0
[ 2.408] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.408] (**) FBDEV(0): using shadow framebuffer
[ 2.408] (II) Loading sub module "shadow"
[ 2.408] (II) LoadModule: "shadow"
[ 2.408] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2.409] (II) Module shadow: vendor="X.Org Foundation"
[ 2.409] compiled for 1.16.4, module version = 1.1.0
[ 2.409] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.409] (II) UnloadModule: "vesa"
[ 2.409] (II) Unloading vesa
[ 2.409] (==) Depth 24 pixmap format is 32 bpp
[ 2.409] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2.413] (==) FBDEV(0): Backing store enabled
[ 2.413] (==) FBDEV(0): DPMS enabled
[ 2.413] (==) RandR enabled
[ 2.416] (II) SELinux: Disabled on system
[ 2.417] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2.417] (EE) AIGLX: reverting to software rendering
[ 2.488] (II) AIGLX: Loaded and initialized swrast
[ 2.488] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2.522] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2.522] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.522] (II) LoadModule: "evdev"
[ 2.522] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2.525] (II) Module evdev: vendor="X.Org Foundation"
[ 2.525] compiled for 1.16.0, module version = 2.9.0
[ 2.525] Module class: X.Org XInput Driver
[ 2.525] ABI class: X.Org XInput driver, version 21.0
[ 2.525] (II) Using input driver 'evdev' for 'Power Button'
[ 2.525] (**) Power Button: always reports core events
[ 2.525] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2.525] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.525] (--) evdev: Power Button: Found keys
[ 2.525] (II) evdev: Power Button: Configuring as keyboard
[ 2.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event2"
[ 2.525] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2.525] (**) Option "xkb_rules" "evdev"
[ 2.525] (**) Option "xkb_model" "pc105"
[ 2.525] (**) Option "xkb_layout" "es"
[ 2.525] (**) Option "xkb_variant" "cat"
[ 2.534] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2.534] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.534] (II) Using input driver 'evdev' for 'Power Button'
[ 2.534] (**) Power Button: always reports core events
[ 2.534] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2.534] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2.534] (--) evdev: Power Button: Found keys
[ 2.534] (II) evdev: Power Button: Configuring as keyboard
[ 2.534] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event1"
[ 2.534] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2.534] (**) Option "xkb_rules" "evdev"
[ 2.534] (**) Option "xkb_model" "pc105"
[ 2.534] (**) Option "xkb_layout" "es"
[ 2.534] (**) Option "xkb_variant" "cat"
[ 2.535] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 2.535] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2.535] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2.535] (**) Sleep Button: always reports core events
[ 2.535] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 2.535] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2.535] (--) evdev: Sleep Button: Found keys
[ 2.535] (II) evdev: Sleep Button: Configuring as keyboard
[ 2.535] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event0"
[ 2.535] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2.535] (**) Option "xkb_rules" "evdev"
[ 2.535] (**) Option "xkb_model" "pc105"
[ 2.535] (**) Option "xkb_layout" "es"
[ 2.535] (**) Option "xkb_variant" "cat"
[ 2.535] (II) config/udev: Adding input device NOVATEK HP USB Multimedia Keyboard (/dev/input/event11)
[ 2.535] (**) NOVATEK HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2.535] (II) Using input driver 'evdev' for 'NOVATEK HP USB Multimedia Keyboard'
[ 2.535] (**) NOVATEK HP USB Multimedia Keyboard: always reports core events
[ 2.535] (**) evdev: NOVATEK HP USB Multimedia Keyboard: Device: "/dev/input/event11"
[ 2.535] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Vendor 0x461 Product 0x4d8a
[ 2.535] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Found keys
[ 2.535] (II) evdev: NOVATEK HP USB Multimedia Keyboard: Configuring as keyboard
[ 2.535] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0461:4D8A.0002/input/input14/event11"
[ 2.535] (II) XINPUT: Adding extended input device "NOVATEK HP USB Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 2.535] (**) Option "xkb_rules" "evdev"
[ 2.535] (**) Option "xkb_model" "pc105"
[ 2.535] (**) Option "xkb_layout" "es"
[ 2.535] (**) Option "xkb_variant" "cat"
[ 2.536] (II) config/udev: Adding input device NOVATEK HP USB Multimedia Keyboard (/dev/input/event12)
[ 2.536] (**) NOVATEK HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 2.536] (II) Using input driver 'evdev' for 'NOVATEK HP USB Multimedia Keyboard'
[ 2.536] (**) NOVATEK HP USB Multimedia Keyboard: always reports core events
[ 2.536] (**) evdev: NOVATEK HP USB Multimedia Keyboard: Device: "/dev/input/event12"
[ 2.536] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Vendor 0x461 Product 0x4d8a
[ 2.536] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Found keys
[ 2.536] (II) evdev: NOVATEK HP USB Multimedia Keyboard: Configuring as keyboard
[ 2.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:0461:4D8A.0003/input/input15/event12"
[ 2.536] (II) XINPUT: Adding extended input device "NOVATEK HP USB Multimedia Keyboard" (type: KEYBOARD, id 10)
[ 2.536] (**) Option "xkb_rules" "evdev"
[ 2.536] (**) Option "xkb_model" "pc105"
[ 2.536] (**) Option "xkb_layout" "es"
[ 2.536] (**) Option "xkb_variant" "cat"
[ 2.536] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event10)
[ 2.536] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 2.536] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 2.536] (**) USB Optical Mouse: always reports core events
[ 2.536] (**) evdev: USB Optical Mouse: Device: "/dev/input/event10"
[ 2.536] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d0f
[ 2.536] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 2.536] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 2.536] (--) evdev: USB Optical Mouse: Found relative axes
[ 2.536] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 2.536] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 2.536] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 2.536] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 2.536] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2.536] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0461:4D0F.0001/input/input13/event10"
[ 2.536] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 11)
[ 2.537] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 2.537] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 2.537] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 2.537] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 2.537] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 2.537] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 2.537] (II) No input driver specified, ignoring this device.
[ 2.537] (II) This device may have been added with another device file.
[ 2.537] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 2.537] (II) No input driver specified, ignoring this device.
[ 2.537] (II) This device may have been added with another device file.
[ 2.537] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event8)
[ 2.537] (II) No input driver specified, ignoring this device.
[ 2.537] (II) This device may have been added with another device file.
[ 2.537] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event9)
[ 2.537] (II) No input driver specified, ignoring this device.
[ 2.537] (II) This device may have been added with another device file.
[ 2.537] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
[ 2.537] (II) No input driver specified, ignoring this device.
[ 2.537] (II) This device may have been added with another device file.
[ 2.538] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 2.538] (II) No input driver specified, ignoring this device.
[ 2.538] (II) This device may have been added with another device file.
[ 2.538] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 2.538] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 2.538] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 2.538] (**) Eee PC WMI hotkeys: always reports core events
[ 2.538] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event4"
[ 2.538] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 2.538] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 2.538] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 2.538] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event4"
[ 2.538] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 12)
[ 2.538] (**) Option "xkb_rules" "evdev"
[ 2.538] (**) Option "xkb_model" "pc105"
[ 2.538] (**) Option "xkb_layout" "es"
[ 2.538] (**) Option "xkb_variant" "cat"
[ 2.538] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 2.538] (II) No input driver specified, ignoring this device.
[ 2.538] (II) This device may have been added with another device file.
[ 2.540] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 3.579] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 25.602] (EE) FBDEV(0): FBIOBLANK: Invalid argument

Answer 9 · 2017-05-31T08:48:09+00:00

antes de probar configuraciones en xorg puedes probar via xrandr

# cvt resoluccion para obtener el modeline a añadir, la información tambien se puede obtener via log en un equipo en el que funcione bien el monitor

$cvt 1440 900
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00"  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync

# añadimos el nuevo modeline
xrandr --newmode  "1440x900_60.00"  106.50  1440 1528 1672 1904  900 903 909 934 -hsync +vsync

# Se lo añadimos al display correspondiente, en mi caso dp1
xrandr --addmode DP1 1440x900_60.00

#pasamos a probarlo
xrandr --output DP1 --mode 1440x900_60.00

En caso satisfactorio deberías de ver algo en el monitor.

Una vez todo ok, puedes añadir la configuracion al fichero xorg. Los pasos seguidos son los de la wiki de arch, https://wiki.archlinux.org/index.php/Xrandr pero debería de funcionarte igualmente.

Answer 10 · 2017-05-31T13:29:16+00:00

A juzgar por tu log de Xorg, te está usando el driver fbdev en lugar del de intel, lo que explicaría que solo te permita elegir una resolución tan básica, una de las más compatibles.

Answer 11 · 2017-05-31T13:49:35+00:00

@nu_kru aquí tienes mi xrandr y /var/log/Xorg.0.log de mi ordenador viejo en el nuevo no funciono el xrandr

pcviejo:~$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
VGA1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
1920x1080 60.00*+
1280x1024 60.02
1360x768 60.02
1280x720 59.97
1024x768 60.00
800x600 60.32
640x480 60.00

/var/log/Xorg.0.logpcviejo

[ 17.935]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 17.935] X Protocol Version 11, Revision 0
[ 17.935] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 17.935] Current Operating System: Linux nompc 3.16.0-4-amd64 #1 SMP Debian 3.16.43-2 (2017-04-30) x86_64
[ 17.935] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=8f034737-6891-4b5e-ac05-55565d4ed0a9 ro initrd=/install/initrd.gz quiet
[ 17.935] Build Date: 11 February 2015 12:32:02AM
[ 17.935] xorg-server 2:1.16.4-1 (http://www.debian.org/support)
[ 17.935] Current version of pixman: 0.32.6
[ 17.935] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.935] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.935] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 31 14:43:08 2017
[ 17.983] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17.995] (==) No Layout section. Using the first Screen section.
[ 17.995] (==) No screen section available. Using defaults.
[ 17.995] (**) |-->Screen "Default Screen Section" (0)
[ 17.995] (**) | |-->Monitor "<default monitor>"
[ 18.004] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.004] (==) Automatically adding devices
[ 18.004] (==) Automatically enabling devices
[ 18.004] (==) Automatically adding GPU devices
[ 18.025] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.025] Entry deleted from font path.
[ 18.026] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 18.026] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.026] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.041] (II) Loader magic: 0x556f21323d80
[ 18.041] (II) Module ABI versions:
[ 18.041] X.Org ANSI C Emulation: 0.4
[ 18.041] X.Org Video Driver: 18.0
[ 18.041] X.Org XInput driver : 21.0
[ 18.041] X.Org Server Extension : 8.0
[ 18.041] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.042] (--) PCI:*(0:0:2:0) 8086:2e32:103c:2a8c rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
[ 18.042] (II) LoadModule: "glx"
[ 18.044] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.055] (II) Module glx: vendor="X.Org Foundation"
[ 18.055] compiled for 1.16.4, module version = 1.0.0
[ 18.055] ABI class: X.Org Server Extension, version 8.0
[ 18.055] (==) AIGLX enabled
[ 18.055] (==) Matched intel as autoconfigured driver 0
[ 18.055] (==) Matched intel as autoconfigured driver 1
[ 18.055] (==) Matched modesetting as autoconfigured driver 2
[ 18.055] (==) Matched fbdev as autoconfigured driver 3
[ 18.055] (==) Matched vesa as autoconfigured driver 4
[ 18.055] (==) Assigned the driver to the xf86ConfigLayout
[ 18.055] (II) LoadModule: "intel"
[ 18.055] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 18.203] (II) Module intel: vendor="X.Org Foundation"
[ 18.203] compiled for 1.15.99.904, module version = 2.21.15
[ 18.203] Module class: X.Org Video Driver
[ 18.203] ABI class: X.Org Video Driver, version 18.0
[ 18.203] (II) LoadModule: "modesetting"
[ 18.203] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.208] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.208] compiled for 1.16.4, module version = 0.9.0
[ 18.208] Module class: X.Org Video Driver
[ 18.209] ABI class: X.Org Video Driver, version 18.0
[ 18.209] (II) LoadModule: "fbdev"
[ 18.209] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.209] (II) Module fbdev: vendor="X.Org Foundation"
[ 18.209] compiled for 1.15.99.904, module version = 0.4.4
[ 18.209] Module class: X.Org Video Driver
[ 18.209] ABI class: X.Org Video Driver, version 18.0
[ 18.209] (II) LoadModule: "vesa"
[ 18.210] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.214] (II) Module vesa: vendor="X.Org Foundation"
[ 18.214] compiled for 1.15.99.904, module version = 2.3.3
[ 18.214] Module class: X.Org Video Driver
[ 18.214] ABI class: X.Org Video Driver, version 18.0
[ 18.214] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 18.215] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.215] (II) FBDEV: driver for framebuffer: fbdev
[ 18.215] (II) VESA: driver for VESA chipsets: vesa
[ 18.215] (++) using VT number 7

[ 18.252] (WW) Falling back to old probe method for modesetting
[ 18.252] (WW) Falling back to old probe method for fbdev
[ 18.252] (II) Loading sub module "fbdevhw"
[ 18.252] (II) LoadModule: "fbdevhw"
[ 18.252] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 18.360] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 18.360] compiled for 1.16.4, module version = 0.0.2
[ 18.360] ABI class: X.Org Video Driver, version 18.0
[ 18.360] (WW) Falling back to old probe method for vesa
[ 18.360] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.360] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 18.360] (==) intel(0): RGB weight 888
[ 18.360] (==) intel(0): Default visual is TrueColor
[ 18.360] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[ 18.361] (**) intel(0): Relaxed fencing enabled
[ 18.361] (**) intel(0): Wait on SwapBuffers? enabled
[ 18.361] (**) intel(0): Triple buffering? enabled
[ 18.361] (**) intel(0): Framebuffer tiled
[ 18.361] (**) intel(0): Pixmaps tiled
[ 18.361] (**) intel(0): 3D buffers tiled
[ 18.361] (**) intel(0): SwapBuffers wait enabled
[ 18.361] (==) intel(0): video overlay key set to 0x101fe
[ 18.476] (II) intel(0): Output VGA1 has no monitor section
[ 18.592] (II) intel(0): EDID for output VGA1
[ 18.592] (II) intel(0): Manufacturer: SNY Model: 1a02 Serial#: 16843009
[ 18.592] (II) intel(0): Year: 2011 Week: 1
[ 18.592] (II) intel(0): EDID Version: 1.3
[ 18.592] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 18.592] (II) intel(0): Sync: Separate
[ 18.592] (II) intel(0): Max Image Size [cm]: horiz.: 160 vert.: 90
[ 18.592] (II) intel(0): Gamma: 2.20
[ 18.592] (II) intel(0): No DPMS capabilities specified; RGB/Color Display
[ 18.592] (II) intel(0): First detailed timing is preferred mode
[ 18.592] (II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
[ 18.592] (II) intel(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
[ 18.592] (II) intel(0): Supported established timings:
[ 18.592] (II) intel(0): 640x480@60Hz
[ 18.592] (II) intel(0): 800x600@60Hz
[ 18.592] (II) intel(0): 1024x768@60Hz
[ 18.592] (II) intel(0): Manufacturer's mask: 0
[ 18.592] (II) intel(0): Supported standard timings:
[ 18.592] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 18.592] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 18.592] (II) intel(0): Supported detailed timing:
[ 18.592] (II) intel(0): clock: 148.5 MHz Image Size: 1600 x 900 mm
[ 18.592] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 18.592] (II) intel(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 18.592] (II) intel(0): Supported detailed timing:
[ 18.592] (II) intel(0): clock: 85.5 MHz Image Size: 1600 x 900 mm
[ 18.592] (II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
[ 18.592] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
[ 18.592] (II) intel(0): Ranges: V min: 57 V max: 63 Hz, H min: 30 H max: 80 kHz, PixClock max 155 MHz
[ 18.592] (II) intel(0): Monitor name: SONY TV
[ 18.592] (II) intel(0): EDID (in hex):
[ 18.592] (II) intel(0): 00ffffffffffff004dd9021a01010101
[ 18.592] (II) intel(0): 0115010308a05a780a0dc9a057479827
[ 18.593] (II) intel(0): 12484c21080081c08180010101010101
[ 18.593] (II) intel(0): 010101010101023a801871382d40582c
[ 18.593] (II) intel(0): 450040846300001e662150b051001b30
[ 18.593] (II) intel(0): 4070360040846300001e000000fd0039
[ 18.593] (II) intel(0): 3f1e500f000a202020202020000000fc
[ 18.593] (II) intel(0): 00534f4e592054560a20202020200077
[ 18.593] (II) intel(0): Printing probed modes for output VGA1
[ 18.593] (II) intel(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 18.593] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 18.593] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 18.593] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 18.593] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 18.593] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 18.593] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 18.593] (II) intel(0): Output VGA1 connected
[ 18.593] (II) intel(0): Using exact sizes for initial modes
[ 18.593] (II) intel(0): Output VGA1 using initial mode 1920x1080
[ 18.593] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 18.593] (II) intel(0): Kernel page flipping support detected, enabling
[ 18.593] (==) intel(0): DPI set to (96, 96)
[ 18.593] (II) Loading sub module "fb"
[ 18.593] (II) LoadModule: "fb"
[ 18.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.595] (II) Module fb: vendor="X.Org Foundation"
[ 18.595] compiled for 1.16.4, module version = 1.0.0
[ 18.595] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.595] (II) Loading sub module "dri2"
[ 18.595] (II) LoadModule: "dri2"
[ 18.595] (II) Module "dri2" already built-in
[ 18.595] (II) UnloadModule: "modesetting"
[ 18.595] (II) Unloading modesetting
[ 18.595] (II) UnloadModule: "fbdev"
[ 18.595] (II) Unloading fbdev
[ 18.595] (II) UnloadSubModule: "fbdevhw"
[ 18.595] (II) Unloading fbdevhw
[ 18.595] (II) UnloadModule: "vesa"
[ 18.595] (II) Unloading vesa
[ 18.595] (==) Depth 24 pixmap format is 32 bpp
[ 18.603] (II) intel(0): [DRI2] Setup complete
[ 18.603] (II) intel(0): [DRI2] DRI driver: i965
[ 18.603] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 18.615] (II) UXA(0): Driver registered support for the following operations:
[ 18.615] (II) solid
[ 18.615] (II) copy
[ 18.615] (II) composite (RENDER acceleration)
[ 18.615] (II) put_image
[ 18.615] (II) get_image
[ 18.616] (==) intel(0): Backing store enabled
[ 18.616] (==) intel(0): Silken mouse enabled
[ 18.616] (II) intel(0): Initializing HW Cursor
[ 18.616] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 18.617] (==) intel(0): DPMS enabled
[ 18.617] (==) intel(0): Intel XvMC decoder enabled
[ 18.617] (II) intel(0): Set up textured video
[ 18.617] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 18.617] (II) intel(0): direct rendering: DRI2 Enabled
[ 18.617] (==) intel(0): hotplug detection: "enabled"
[ 18.656] (--) RandR disabled
[ 18.664] (II) SELinux: Disabled on system
[ 18.799] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 18.799] (II) AIGLX: enabled GLX_ARB_create_context
[ 18.799] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 18.799] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 18.799] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 18.799] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 18.799] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 18.799] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 18.799] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 18.800] (II) AIGLX: Loaded and initialized i965
[ 18.800] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 18.800] (II) intel(0): Setting screen physical size to 508 x 285
[ 19.086] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 19.087] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.087] (II) LoadModule: "evdev"
[ 19.087] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19.112] (II) Module evdev: vendor="X.Org Foundation"
[ 19.112] compiled for 1.16.0, module version = 2.9.0
[ 19.112] Module class: X.Org XInput Driver
[ 19.112] ABI class: X.Org XInput driver, version 21.0
[ 19.112] (II) Using input driver 'evdev' for 'Power Button'
[ 19.112] (**) Power Button: always reports core events
[ 19.112] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 19.112] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.112] (--) evdev: Power Button: Found keys
[ 19.112] (II) evdev: Power Button: Configuring as keyboard
[ 19.113] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 19.113] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 19.113] (**) Option "xkb_rules" "evdev"
[ 19.113] (**) Option "xkb_model" "pc105"
[ 19.113] (**) Option "xkb_layout" "es"
[ 19.113] (**) Option "xkb_variant" "cat"
[ 19.192] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 19.192] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19.192] (II) Using input driver 'evdev' for 'Power Button'
[ 19.192] (**) Power Button: always reports core events
[ 19.192] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 19.192] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 19.192] (--) evdev: Power Button: Found keys
[ 19.192] (II) evdev: Power Button: Configuring as keyboard
[ 19.192] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event0"
[ 19.192] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 19.192] (**) Option "xkb_rules" "evdev"
[ 19.192] (**) Option "xkb_model" "pc105"
[ 19.192] (**) Option "xkb_layout" "es"
[ 19.192] (**) Option "xkb_variant" "cat"
[ 19.193] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 19.193] (II) No input driver specified, ignoring this device.
[ 19.193] (II) This device may have been added with another device file.
[ 19.193] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event8)
[ 19.193] (II) No input driver specified, ignoring this device.
[ 19.193] (II) This device may have been added with another device file.
[ 19.193] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event9)
[ 19.193] (II) No input driver specified, ignoring this device.
[ 19.193] (II) This device may have been added with another device file.
[ 19.194] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event10)
[ 19.194] (II) No input driver specified, ignoring this device.
[ 19.194] (II) This device may have been added with another device file.
[ 19.194] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 19.194] (II) No input driver specified, ignoring this device.
[ 19.194] (II) This device may have been added with another device file.
[ 19.194] (II) config/udev: Adding input device NOVATEK HP USB Multimedia Keyboard (/dev/input/event2)
[ 19.194] (**) NOVATEK HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.194] (II) Using input driver 'evdev' for 'NOVATEK HP USB Multimedia Keyboard'
[ 19.194] (**) NOVATEK HP USB Multimedia Keyboard: always reports core events
[ 19.194] (**) evdev: NOVATEK HP USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 19.194] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Vendor 0x461 Product 0x4d8a
[ 19.194] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Found keys
[ 19.194] (II) evdev: NOVATEK HP USB Multimedia Keyboard: Configuring as keyboard
[ 19.194] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/0003:0461:4D8A.0001/input/input5/event2"
[ 19.194] (II) XINPUT: Adding extended input device "NOVATEK HP USB Multimedia Keyboard" (type: KEYBOARD, id 8)
[ 19.194] (**) Option "xkb_rules" "evdev"
[ 19.194] (**) Option "xkb_model" "pc105"
[ 19.194] (**) Option "xkb_layout" "es"
[ 19.194] (**) Option "xkb_variant" "cat"
[ 19.195] (II) config/udev: Adding input device NOVATEK HP USB Multimedia Keyboard (/dev/input/event3)
[ 19.195] (**) NOVATEK HP USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 19.195] (II) Using input driver 'evdev' for 'NOVATEK HP USB Multimedia Keyboard'
[ 19.195] (**) NOVATEK HP USB Multimedia Keyboard: always reports core events
[ 19.195] (**) evdev: NOVATEK HP USB Multimedia Keyboard: Device: "/dev/input/event3"
[ 19.195] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Vendor 0x461 Product 0x4d8a
[ 19.195] (--) evdev: NOVATEK HP USB Multimedia Keyboard: Found keys
[ 19.195] (II) evdev: NOVATEK HP USB Multimedia Keyboard: Configuring as keyboard
[ 19.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/0003:0461:4D8A.0002/input/input6/event3"
[ 19.195] (II) XINPUT: Adding extended input device "NOVATEK HP USB Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 19.195] (**) Option "xkb_rules" "evdev"
[ 19.195] (**) Option "xkb_model" "pc105"
[ 19.195] (**) Option "xkb_layout" "es"
[ 19.195] (**) Option "xkb_variant" "cat"
[ 19.196] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 19.196] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 19.196] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 19.196] (**) USB Optical Mouse: always reports core events
[ 19.196] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 19.196] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d0f
[ 19.196] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 19.196] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 19.196] (--) evdev: USB Optical Mouse: Found relative axes
[ 19.196] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 19.196] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 19.196] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 19.196] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 19.196] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19.196] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:0461:4D0F.0003/input/input7/event4"
[ 19.196] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 19.196] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 19.196] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 19.196] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 19.196] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 19.196] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 19.196] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 19.196] (II) No input driver specified, ignoring this device.
[ 19.196] (II) This device may have been added with another device file.
[ 19.197] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 19.197] (II) No input driver specified, ignoring this device.
[ 19.197] (II) This device may have been added with another device file.
[ 26.028] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 26.028] (II) intel(0): Using EDID range info for horizontal sync
[ 26.028] (II) intel(0): Using EDID range info for vertical refresh
[ 26.028] (II) intel(0): Printing DDC gathered Modelines:
[ 26.028] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 26.028] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 26.028] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 26.028] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 26.028] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 26.028] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 26.028] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 31.700] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 31.700] (II) intel(0): Using hsync ranges from config file
[ 31.700] (II) intel(0): Using vrefresh ranges from config file
[ 31.700] (II) intel(0): Printing DDC gathered Modelines:
[ 31.700] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 31.700] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 31.700] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 31.700] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 31.700] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 31.700] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 31.700] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 44.956] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 44.956] (II) intel(0): Using hsync ranges from config file
[ 44.956] (II) intel(0): Using vrefresh ranges from config file
[ 44.956] (II) intel(0): Printing DDC gathered Modelines:
[ 44.956] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 44.956] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 44.956] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.956] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.956] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.956] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.956] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 47.552] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 47.552] (II) intel(0): Using hsync ranges from config file
[ 47.552] (II) intel(0): Using vrefresh ranges from config file
[ 47.552] (II) intel(0): Printing DDC gathered Modelines:
[ 47.552] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 47.552] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 47.552] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 47.552] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 47.552] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 47.552] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 47.552] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 241.992] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 241.992] (II) intel(0): Using hsync ranges from config file
[ 241.992] (II) intel(0): Using vrefresh ranges from config file
[ 241.992] (II) intel(0): Printing DDC gathered Modelines:
[ 241.992] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 241.992] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 241.992] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 241.992] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 241.992] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 241.992] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 241.992] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 264.912] (II) intel(0): EDID vendor "SNY", prod id 6658
[ 264.912] (II) intel(0): Using hsync ranges from config file
[ 264.912] (II) intel(0): Using vrefresh ranges from config file
[ 264.912] (II) intel(0): Printing DDC gathered Modelines:
[ 264.912] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 264.912] (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 264.912] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 264.912] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 264.912] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 264.912] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 264.912] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

@Jankusanagi como puedo añadir el drive correcto?

Answer 12 · 2017-05-31T17:17:59+00:00

Si es un equipo muy reciente puede que Debian no reconozca correctamente el hardware por el kernel viejo que trae, intenta instalar un kernel mas reciente desde los repositorios backports.

Saludos.

Answer 13 · 2017-05-31T18:27:14+00:00

_Slash_ escribió:Si es un equipo muy reciente puede que Debian no reconozca correctamente el hardware por el kernel viejo que trae, intenta instalar un kernel mas reciente desde los repositorios backports.

Saludos.

Me compre un ordenador con un disco duro SSD con partición GPT en Windows 10 y UEFI y yo no tenia la mas remota idea de que el UEFI lo ponía Microsoft porque no quiere otro sistema operativo en sus maquinas con windows instalado. Bueno trasteando en la (bios) UEFI tuve que quitar las calves y deshabilitar el “arranque seguro” aún así no podía instalar el debian 8 LTS y me baje el debian 8.8 y me fue de maravilla.
Ahora tengo miedo de instalar el último kernel ya que la comunidad debianita dice que el debian 9 que saldrá pronto de momento no soportara el UEFI
Como puedo estar seguro que sera compatible con mi bios/UEFI?

:~# aptitude search linux-image
i A linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs
p linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
p linux-image-4.9.0-0.bpo.2-amd64 - Linux 4.9 for 64-bit PCs (signed)
p linux-image-4.9.0-0.bpo.2-amd64-dbg - Debugging symbols for Linux 4.9.0-0.bpo.2-amd64
p linux-image-4.9.0-0.bpo.2-amd64-unsigned - Linux 4.9 for 64-bit PCs
p linux-image-4.9.0-0.bpo.2-rt-amd64 - Linux 4.9 for 64-bit PCs, PREEMPT_RT (signed)
p linux-image-4.9.0-0.bpo.2-rt-amd64-dbg - Debugging symbols for Linux 4.9.0-0.bpo.2-rt-amd64
p linux-image-4.9.0-0.bpo.2-rt-amd64-unsigned - Linux 4.9 for 64-bit PCs, PREEMPT_RT
p linux-image-4.9.0-0.bpo.3-amd64 - Linux 4.9 for 64-bit PCs
p linux-image-4.9.0-0.bpo.3-amd64-dbg - Debug symbols for linux-image-4.9.0-0.bpo.3-amd64
p linux-image-4.9.0-0.bpo.3-rt-amd64 - Linux 4.9 for 64-bit PCs, PREEMPT_RT
p linux-image-4.9.0-0.bpo.3-rt-amd64-dbg - Debug symbols for linux-image-4.9.0-0.bpo.3-rt-amd64
p linux-image-4.9.0-2-grsec-amd64 - Linux 4.9 for 64-bit PCs, Grsecurity protection
i linux-image-amd64 - Linux for 64-bit PCs (meta-package)
p linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-pack
p linux-image-grsec-amd64 - Linux image meta-package, grsec featureset
p linux-image-rt-amd64 - Linux for 64-bit PCs (meta-package), PREEMPT_RT
p linux-image-rt-amd64-dbg - Debugging symbols for Linux rt-amd64 configuration (meta-p

Saludos

Answer 14 · 2017-05-31T20:45:58+00:00

Instala el kernel linux-image-4.9.0-0.bpo.3-amd64.

Sobre uefi no hay problema, eso se soluciona instalando refind.

Saludos.

canjaume 31 may 2017 23:19 Novato 11 mensajes desde **may 2017** · Answer 15 · 2017-05-31T21:19:42+00:00

_Slash_ escribió:Instala el kernel linux-image-4.9.0-0.bpo.3-amd64.

Sobre uefi no hay problema, eso se soluciona instalando refind.

Saludos.

No se quiere instalar....

:~# aptitude install linux-image-4.9.0-0.bpo.3-amd64
Els paquets nous següents s'instal·laran:
linux-image-4.9.0-0.bpo.3-amd64{b}
0 paquets actualitzats, 1 instal·lats, 0 a suprimir i 0 a no actualitzar.
Es necessita obtenir 38,5 MB d'arxius. Després del desempaquetat s'utilitzaran 191 MB.
No s'han trobat les dependències del paquets següents:
linux-image-4.9.0-0.bpo.3-amd64 : Depèn: linux-base (>= 4.3~) però el 3.5 està instal·lat.
Les accions següents resoldran les dependències:

Mantín la versió actual dels següents paquets:
1) linux-image-4.9.0-0.bpo.3-amd64 [No instal·lat]

Accepteu la solució? [Y/n/q/?] Y
No s'instal·larà, actualitzarà o suprimirà cap paquet.
0 paquets actualitzats, 0 instal·lats, 0 a suprimir i 0 a no actualitzar.
Es necessita obtenir 0 B d'arxius. Després del desempaquetat s'utilitzaran 0 B.

Saludos

Answer 16 · 2017-05-31T21:59:05+00:00

Es raro que no te deje instalarlo, intenta con el kernel linux-image-4.9.0-0.bpo.2-amd64.

canjaume 01 jun 2017 00:46 Novato 11 mensajes desde **may 2017** · Answer 17 · 2017-05-31T22:46:14+00:00

_Slash_ escribió:Es raro que no te deje instalarlo, intenta con el kernel linux-image-4.9.0-0.bpo.2-amd64.

Tampoco me deja instalarlo. Es una situación rara...

Saludos

Answer 18 · 2017-05-31T23:49:13+00:00

prueba haciendo "upgrade kernel"
no sé en debian pero en slackware el comando es "slackpkg upgrade kernel"

canjaume 01 jun 2017 11:01 Novato 11 mensajes desde **may 2017** · Answer 19 · 2017-06-01T09:01:32+00:00

matuanime escribió:prueba haciendo "upgrade kernel"
no sé en debian pero en slackware el comando es "slackpkg upgrade kernel"

Hice el "upgrade kernel" añadiendo al sources.list
deb http://mirror.one.com/debian/ jessie-backports main contrib non-free

apt-get update
apt-get install -t jessie-backports linux-image linux-image-amd64
me instalo el kernel Linux 4.9.0-0.bpo.3-amd64 pero cuando carga me quedo con un pantallazo y de ahí no sale. Tengo que apagar físicamente del ordenador y al reiniciar tengo que elegir el Kernel Linux 3.16.0-4-amd64 para entrar en debian

Aquí (*) os dejo mi /boot/grub/grub.cfg
(*) http://nerea.cat/gnu/grub-cfg.txt

Gracias por la ayuda recibida!
Saludos

Answer 20 · 2017-06-01T14:04:31+00:00

Que cosa mas rara, ayer hice upgrade kernel y sin problemas me instaló la 4.4.38-smp :-?

canjaume 01 jun 2017 16:16 Novato 11 mensajes desde **may 2017** · Answer 21 · 2017-06-01T14:16:54+00:00

matuanime escribió:Que cosa mas rara, ayer hice upgrade kernel y sin problemas me instaló la 4.4.38-smp

Tener deshabilitado el Secure Boot puede tener que ver con el kernel Linux 4.9.0-0.bpo.3-amd64

Saludos

Answer 22 · 2017-06-01T14:25:17+00:00

canjaume escribió:
matuanime escribió:Que cosa mas rara, ayer hice upgrade kernel y sin problemas me instaló la 4.4.38-smp

Tener deshabilitado el Secure Boot puede tener que ver con el kernel Linux 4.9.0-0.bpo.3-amd64

Saludos

no deberia, activar el secure boot lo unico que hace es impedir la ejecucion de codigo no firmado y certificado por el fabricante