Nuevo Bootloader en consolas Jasper

User "jc" in #free60 found that his Jasper, built June-30th 2009, already contained the new bootloader (but with a 7363 Kernel).

We don't know when Microsoft switched it in production, but this discovery means that they did this at least over a month before the update.

So far, we don't know what Boxes are safe to buy. If you want to check your box, dump the flash, at look at the "CB" Version (offset 0x8202, the two hex bytes after "CB"). For Jasper, CB Versions 6750 (and up) are bad, CB Version 6723 is still good (at least we think so), CB Version 6712 is good for sure.

If you find that your jasper is still either "good" or "bad", please post the mfg date (and CB version) here so we can determine the cutoff date.

Let me remind your that we are not completely done with the adaptation of the hack to jasper yet. We've sorted out most things now, so we'll release it soon. The recent build.py changes will make an adaptation easily possible, and nandpro already supports jasper. Remaining things are the SMC and the J1F1-replacement points. We're working on this, don't worry.

My Jasper, built 2008-10-10, is "good" (CB version 6712).

Hasta el momento, no sabemos qué son seguras las casillas para comprar.

Cyberyayo escribió:Si la intención es buena, no te digo que no...

... pero el Google Translator sirve para orientar e intentar descifrar que pone la página inicial, no para tomarlo como traducción "de facto" porque el resultado es poco menos que ridículo en algunas ocasiones.

Hasta el momento, no sabemos qué son seguras las casillas para comprar.

Saludos!

User "jc" in #free60 found that his Jasper, built June-30th 2009, already contained the new bootloader (but with a 7363 Kernel).

We don't know when Microsoft switched it in production, but this discovery means that they did this at least over a month before the update.

So far, we don't know what Boxes are safe to buy. If you want to check your box, dump the flash, at look at the "CB" Version (offset 0x8202, the two hex bytes after "CB"). For Jasper, CB Versions 6750 (and up) are bad, CB Version 6723 is still good (at least we think so), CB Version 6712 is good for sure.

If you find that your jasper is still either "good" or "bad", please post the mfg date (and CB version) here so we can determine the cutoff date.

Let me remind your that we are not completely done with the adaptation of the hack to jasper yet. We've sorted out most things now, so we'll release it soon. The recent build.py changes will make an adaptation easily possible, and nandpro already supports jasper. Remaining things are the SMC and the J1F1-replacement points. We're working on this, don't worry.

My Jasper, built 2008-10-10, is "good" (CB version 6712).

El usuario "jc" en #free60 se dio cuenta que su Jasper, hecha el 30 de Junio del 2009, ya contenia el nuevo bootlader (a pesar de que su consola venia con el kernel 7363).

No sabemos cuando Microsoft cambio esto en la produccion, pero este descubrimiento significa que lo hicieron al menos un mes antes de la actualizacion.

Hasta ahora no sabemos que cajas (Aqui no entiendo si con "boxes" se refiere a la caja donde viene la XBOX o a la XBOX misma) son 'seguras' de comprar (que contengan el bootloader compatible con el xploid). Si quieres checar si tu xbox lo es, entonces dumpea la flash, y echa un vistaso a la version "CB" (offset 0x8202, los dos "hex bytes" despues de "CB").

Para las jasper, las versiones CB 6750 (y para arriba) son 'malas' (es decir, no xploid), las versiones CB 6723 aun son 'buenas' (al menos eso es lo que creemos), las versiones CB 6712 son buenas fijo!.

Si sabes o averiguas si tu jasper es 'buena' o 'mala', por favor postea la fecha de fabricacion (y la version CB) aqui. De esa forma podremos determinar la fecha en la que se empezaron a dar los cambios.

Les recuerdo que aun no hemos terminado la adaptacion del hack a las placas Jasper. Tenemos ya casi todas las cosas contempladas para el hack en las Jasper, asi que pronto liberaremos el hack para dichas placas. Los recientes cambios en el build.py van a hacer la adaptacion a esta placa mas facil. Ademas, el nandpro ya soporta las placas Jasper. Las cosas que aun faltan por hacer son el SMC y los puntos de reempleazo del J1F1. Estamos trabajando en ello, asi que no se preocupen.

Mi Jasper, hecha el 10/10/2008 es 'buena' (version CB 6712).