Retropie CRT Edition - Raspberry pi 2B/3B/3B+ - TV 15Khz (vga666 / pi2scart / rgb-pi)

@DeathWalk No hay ningún ajuste que sea adecuado para todos los juegos, tanto verticales como horizontales ...
depende del monitor utilizado. Si tienes un clásico de 15,7 khz, tienes que hacer concesiones ... una vez que hayas ajustado la pantalla en los juegos de pantalla completa, compatible con el tipo de monitor / resolución ... para el resto, la función CROP / FORCE no ayuda si no parcialmente.
Entonces ... en el caso de ADVMAME, se debe seleccionar otra resolución alternativa en los archivos apropiados (publicación explicada arriba) ... en el caso de libreto central (mame plus 2003 ....) uno debe ingresar a la configuración de video RETROARCH menú (del juego, por supuesto) cambia la configuración de video de SCALA ....
en ambos casos obtienes un FULL SCREEN sin cortes ... pero es cuestión de compromisos, porque obviamente ya no será un píxel perfecto, ¡sino un redimensionamiento! ... obviamente MUCHO mejor que configurarlo a MANO a través de incómodas y delicadas recorta la geometría del monitor ... PARA CADA JUEGO / USO ....

trad. (google)
@Snatcher10 Yo tengo una de este estilo (https://es.aliexpress.com/item/33039918 ... 4ea4yU0qVL) y me va bien. Al ser un disipador pasivo no necesitas ventilador y no tienes problema por tener el GPIO ocupado. La he probado con Pi2Scart y ajusta perfectamente, con RGB-Pi tuve que recortar un poco los extremos del conector y para usarlo con un VGA666 habría que añadirle un pequeño extensor para el GPIO.
Sobre el modelo de Rpi ahora mismo el más potente compatible es el 3B+, así que cogería ese porque prácticamente no hay diferencia de precio con modelos anteriores.

Adjuntos

Botvinnik escribió:@Snatcher10 Yo tengo una de este estilo (https://es.aliexpress.com/item/33039918 ... 4ea4yU0qVL) y me va bien. Al ser un disipador pasivo no necesitas ventilador y no tienes problema por tener el GPIO ocupado. La he probado con Pi2Scart y ajusta perfectamente, con RGB-Pi tuve que recortar un poco los extremos del conector y para usarlo con un VGA666 habría que añadirle un pequeño extensor para el GPIO.
Sobre el modelo de Rpi ahora mismo el más potente compatible es el 3B+, así que cogería ese porque prácticamente no hay diferencia de precio con modelos anteriores.

Vale muchas gracias, tomo nota, saludos.
Muy buenas a todos!
He querido actualizar mi antigua versión de Retropie CRT Edition por la última y más actual pero Balena Etcher me lanza este error. Y lo he vuelto a descargar y me vuelve a dar el mismo error. Alguna idea de cómo puedo solucionarlo?

Gracias.

Editado: He probado a descomprimir con WinRAR y luego grabar con Balena Etcher y entonces SI ha funcionado.
Gracias!!

Adjuntos

Reciente possedor del vga666 me quedo por aqui, que tengo una distro antigua y tengo mucho que leer.

Que version de demont front os funciona y con que emu?
El moonwalker me funcionaba en una version antigua y ahora no, os ha pasado?
Buenas,

Tengo una pregunta, yo tengo un RGB-PI y uso el sistema RGB-Pi OS 2 de su página web, en general estoy contento con el pero no me funciona un arcade stick que tengo y que si me va en otra imagen que tengo de Retropie normal para cuando quiero poner la raspberry por HDMI. La pregunta es, ¿Qué tal en cuestiones de rendimiento este RETROPIE CRT EDITION comparado con RGB-Pi OS? ¿Alguien ha hecho la comparativa?

Saludos
@Shiverson Buenas, yo hace bastante que no utilizo RGB-Pi OS pero si no recuerdo mal los dos sistemas utilizan los mismos emuladores (Retroarch, MAME, FBA, etc.) para la mayoría de plataformas y la diferencia entre ambos sistemas es sobre todo el frontend, así que a la hora de emular no creo que haya mucho cambio. Yo por ejemplo utilizo una Rpi 3B+ y todos los juegos de 8 y 16 bits me van perfectamente y por lo general los de PSX también, como mucho hay alguno de N64 que se atasca.

Un saludo.
(mensaje borrado)
An error occurred connecting to the bluetooht device (Creating device failed: org.bluez.Error.AlredyExists: Alredy Exists)

Este error me da cada vez que intento emparejar un mando arcade stick N30 de 8bitdo que he comprado de segunda mano, despues de hacer el segundo paso de registrar el mando. Justo después de elegir el modo de seguridad elegiendo DisplayYesNo al darle OK me da ese error.
¿Alguien sabe de qué manera solucionarlo?
En otras dos imagenes preconfiguradas de retropie no he tenido problemas.
Gracias.
Una raspberry pi 3 modelo A, serviría para esto?. No la veo en la lista y son muy baratas.
Si que te vale. Al menos eso creo yo. Pero espera que alguien más experimentado te responda.
@-krahs- .... and willing geeks

I'd like to be able to add some missing systems, even experimental ones, but I need help, small steps too ...
I tried to figure it out about CONFIG / ALL / CRT / BIN
but language and above all logic seem truly alien.
I took for example DOSBOX from packages installable from retropie config menu ..... and by inserting specific games on the PC folder I managed to make some of them work.
I then tried to install the PSP packages, like DREAMCAST, but there is nothing to do as the "control" intervenes and tells you SYSTEM NOT SUPPORTED.
and I can't somehow bypass that ....
then I take the VICE .from binary install .. (not the libreto.vice which is already installed) ...
the vice allows you to choose which system, 128, 64 various versions, vic20 ... this certainly has the compatible resolutions, like the LR-vice ... I tried to associate (commandmenu) vice with a c64 game .... and SYSTEMA NOT SUPPORTED comes out ....
here too, I tried to add some lines in the CONFIG / ALL / CRT / BIN files but nothing to do ....

I remeber Krahs tell , that is possible to add more system but there are work for add linesin many files....HERE I AM!!!!
need to know HOW and where... ;)

basically without HELP nobody can try to do something.

it would be nice, for those who want to dedicate time to this project, to help make an "addition" to learn how to proceed with this software. I would be extremely available ... but I am alone in the highest sea.
let's hope.... [beer]
@claudiazan [beer] [beer] [beer] [beer] [beer]


quote totally.
I tried too but to no avail.
totally missing a reference site, the code and minimal explanations not on the code but on the functions of the ready image, they do not help absolutely) the only 2 authors are those who can lead the way.
there are 2 important things. the first, as you rightly did, try to change things, through the configuration files / crt / bin..etc .. which you simply access via the network, which can be read, modified and saved on the fly. and are visible via the network (wifi) in the network folder of the pc / windows when you turn on the PI / crtevo (obviously configured with wifi) ... therefore easy management of roms, bios but also of everything (or almost) necessary to carry out various changes including the inclusion of a new system not present in the official version today.

the second important thing, is that probably there are important files to know (and modify or insert) ALSO in the "retropie" section that the network does not show you .... folders you access only with FPT softwares, and some files among these are not editable (you need a linux system and deep knowledge of permissions ... otherwise you ruin the partition making it unusable on SD)

you were talking about DOSBOX, and in fact it is enough to easily access the RETROPIE configurations from the CRTEVO menu, install the additional DOSBOX package, add games in the appropriate compatible way, in the specific ROMS directory called PC .... to see it work without any message incompatible system.

unfortunately as you have rightly noticed for other packages / emulators the same thing does not work, and it is certainly not a graphic resolution limit problem, exact vice that emulates the famous 8 bit commodore, it is not different from lr-vice (the one already present ) ... the problem is that vice is not part of retroarch, while lr-vice is. VICE is more powerful than Lr-vice both in terms of functionality and options, and as an emulation, so much so that it allows you to emulate other commodors and not only the c64 (see vic20 in fact) ...

so probably to make it work (vice) and not see that horrible incompatible system writing when you try to start a test game, it's not enough to install the package from retropie, but files / strings must be added ....
And here I am totally on the high seas like you.

it would be nice to start from here, to understand how to do it, one thing is sure, I do not think it is necessary to start from a still virgin image to be unpacked, but you can work a ready image, precisely through what you access via the network, and via fpt.
possibly if no one is interested here, please write in private, maybe in 2 by dint of attempts we can do something.
@jimiz

In the case of LR-VICE, as you have seen, it is impossible to have the choice of the various 8-bit commodore, as you can only choose c64 in all its sauces and pet.
inside retropie, on the sd you can only read not write.
the core file is totally missing: vice_xvic_libretro.so
you can't add it because the directory is write-closed.
you can't send it via wifi like other files.

install the package completely from SOURCE from retropie config. it is useless, because it does not install the complete cores but only the c64 one. certainly retropie problem, which in this crt evo is closed and now dated.
update retropie directly from the system = completely ruin the system ... then nothing will work anymore!
I think it is necessary to start from the image before it is unpacked, and even before compiling the updated (complete) and improved code.

unfortunately I don't see any interest in updates.
I will contact you privately, let's see if together we can make this crt evo more complete as it deserves!
Hola!

Estoy muy contento con la distrubucion, mil felicitaciones a los creadores! esperemos que algun dia se pueda jugar a la Pi4 con esta pedazo de dist.

Tengo una duda,

Es mejor no tocar las opciones por defecto para mejorar el lag en 16 bits ?

Yo he tocado estas opciones: (en una Pi 3 a+ a 1,4ghz de fabrica con disipador extra)

retroarch:
Hard GPU SYNC : ON
VIDEO THREARED : OFF

crt config :

CPU MODE IN GAME : PERFORANCE

¿hay alguna opción de estas que perjuique temas de lag o puedo añadir alguna extra que lo mejore sin perjudicar FPS / rendimiento?

Gracias!
@ Claudia

Surprice... vic20 ?! YES can work just a problem to "fix" better but work fine with any prg and crt / memory...
crtevo can support more system psp too....
with iphone (old) video not so good on YT but on real crt are perfect!!!

https://youtu.be/-DMHKOSAKrI

https://youtu.be/uciJc_xwGU4

https://youtu.be/0aiBgjPtIRA

https://youtu.be/mzhx7J4Af74

XD [beer] XD
Una pregunta, la estructura de carpetas para las ROMs es igual que en RGB-Pi? Si quito el pendrive con las ROMs configuradas con la estructura de carpetas de rbg-pi y lo pincho en la última versión de CRT edición funcionará??
Y otra pregunta, donde puedo comprar el piCRT y el cable de VGA a scart que se hablan en la página 12 de este hilo?? Sale más barato que el RGB-Pi ??
Gracias
@Otrof1stro Buenos días, la estructura de las roms no creo que funcione, pero puedes hacer la prueba.
Por otra parte lo que quieres comprar está disponible en la página de Antonio Villena, lo buscas en google y te aparece como primera opcion.
Otrof1stro escribió:Una pregunta, la estructura de carpetas para las ROMs es igual que en RGB-Pi? Si quito el pendrive con las ROMs configuradas con la estructura de carpetas de rbg-pi y lo pincho en la última versión de CRT edición funcionará??
Y otra pregunta, donde puedo comprar el piCRT y el cable de VGA a scart que se hablan en la página 12 de este hilo?? Sale más barato que el RGB-Pi ??
Gracias


no , not work! crtevo use a different filesystem format on usb... of rgb-pi
Ok. Muchas gracias a los dos por contestar.
Probaré lo de la estructura de ROMs.
En la página de Villena veo que cuesta 20€ la opción más económica, que entiendo son dos cosas, el piCRT y un conector a VGA a Scart, estoy en lo cierto? Sabéis cuánto es el envío?
También entiendo que el piCRT sirve para sacar RGB y Audio stereo al mismo tiempo, para conectar mandos o panel arcade sería mediante USB y Zero delay por ejemplo, no?
Y por último, el piCRT es 100% compatible con el SO de RGB-Pi?? O en las últimas versiones de este soft han "capado" el piCRT??
Es que quiero hacerme un montaje de Raspberry Pi3 con el piCRT en una recreativa, por lo que salida Scart del adaptador de VGA a Scart lo conecto a la entrada RGB y Sincronismos del monitor arcade, el audio del Scart lo llevo a un ampli audio estéreo y le pongo dos altavoces a la recreativa (ahora solo tiene uno) y el panel arcade mediante dos zero delay por USB porque el panel arcade es doble (dos jugadores cada uno con su joystick y botones).
Sería todo esto correcto?
Si es así tendría opción a usar Reteopie CRT Edition (CRT Evo) o RGB-Pi con el piCRT, no? Sólo la pega de que probablemente cambie la estructura de las carpetas ROMs por lo que el pendrive que use con el romset completo no me sirva para las dos versiones de sistema operativo.
Saludos.
@Otrof1stro este hilo es para tratar temas relativos a retropie crt edition.
Tienes muchos otros hilos para construccion de recreativas o puedes abrir otro.
(mensaje borrado)
Siempre se me olvida postearlo.

Si alguno sigue con problemas con el el emu de C64 y no les funciona el botón de fuego, la solución más rápida que he encontrado es:

Carga cualquier juego de C64.
Ir al menú de Retroarch (Select + X)
Ir hacia atras en el menú (B)
Ir a 'Settings'
Ir a 'Input'
Seleccionar 'Maximun Users' y seleccionar 2.
Volver hacia atrás en el menú hasta llegar al menú principal (pulsando 2 veces B)
Ir a 'Quick Menu'
Ir a 'Overrides'
Seleccionar 'Save Core Overrides'
Volver al menú principal pulsando de nuevo dos veces B
Salir del emu en 'Quit Retroarch'

Al cargar cualquier juego de C64 ya funcionará el botón de fuego.

En todo este tiempo he probado muchas formas de hacerlo pero creo que esta es la más sencilla.
Hello everyone, first post here :)

Thanks for your work, it's by far the best CRT image out there.

I have a few questions:

First, would it be possible to add a NTSC 60hz Amiga mode, in a separate system? So that is has a proper 240p modeline and the correct speed. NTSC games run at 288p currently, somewhat stretched, and they are ugly.

Where is the 50/60hz choice stored, once it's made for a specific game? I'd like to change and reset a few.
Edit: found that, it's in /opt/retropie/configs/all/CRT/bin/ScreenUtilityFiles/config_files/autofreqdb.cfg

I briefly tried the Atari ST, but it seems to run in a quarter of the screen. Any fix?

thanks!
@Amplifuzz

You can do if you first set right you like , X games with retroarch options (inside the game) here you can set many about video mode/resolution... ofcourse, save.... and later you create 2 prefears sets of games 60 and 50 Hz...without touch the amiga/set....
So, I did add a new system in es_systems.cfg and called it amiga_ntsc, adding all the corresponding folders and files around. Basically these:

/opt/retropie/configs/amiga_ntsc/emulators.cfg
/home/pi/RetroPie/roms/amiga_ntsc/
/opt/retropie/configs/all/CRT/Retroarch/configs/amiga_ntsc.cfg
/opt/retropie/configs/all/CRT/Retroarch/cores/amiga_ntsc-core.cfg

I added a standard 1920x240 60hz modeline in /opt/retropie/configs/all/CRT/Resolutions/base_systems.cfg

When I try launching a game I get the "system [amiga_ntsc] system not supported!" from emulator_launcher.py

What can I change to make it work?
It is really difficult to understand how and what to modify / add, to make some other system not yet understood functional, or by adding something that is already there as you wish. Unfortunately I tried to ask here willing to try to make a sort of guide, on how to add a new system, for example the vic20 which is 100% supported .... Unfortunately I only half succeeded, but I miss them still some parts that I don't know how to solve.
Only the 2 authors of this modified version of retropie can explain and help ...Of course there are no obligations of the authors ... and therefore even without help or further updates, that's okay ... it would be nice, however, that this project was more "open" and more people could improve / complete it ... at present (documentation / code / source) is Arabic / alien. For the moment everything has stopped there for months now ....meaby FINAL stay for THE END.

THERE would be an alternative in your case ....
first go to modify game x game among those already present in your AMIGA folder, entering every started game, in the retroarch menu, go to options and you can set the PAL or NTSC system and other video / audio options if you need them .. .and save this on the single game.
when you have everything sorted ... from the emulationstation menu, you can automatically create new favorite folders (which you can then change in name and appearance) and using the Y button, choose all the "pal" games on a specific favorite folder .. ..and all those "ntsc" on another specific folder ...
to save...
or insert the names of the games manually in the cfg files of the favorites .... with a text editor.

in this way, at the end you will have 3 folders ... the main one with all amiga games, like now .... plus 2 "favorite" folders amiga ntsc .... amiga pal ...
end ... harder to explain than to do.

in this case you will have no errors whatsoever at least.
jimiz escribió:It is really difficult to understand how and what to modify / add, to make some other system not yet understood functiona ...


Thanks, but I'm afraid that it would not work. Unless I overlooked something there needs to be a different modeline specified before Retroarch is launched, and it must be done by either being a different system, or with the 50/60hz selector, which is not needed as the roms are separated already.
to me work fine, I have games running at 50 hz (pal) and anothers 60 (ntsc) only change options on those games inside retroarch/options and saved... now when I run them I must not change anything , or select 60/50 because are just saved . hope you resolve with your way.
Ah well, I solved by adding the system to "get_system_list()" in

/opt/retropie/configs/all/CRT/bin/GeneralModule/launcher_module/plugins/libretro.py

So for future reference here is the full list of files that I added / modified, of course a few files or directories are copied from the original amiga ones then tweaked:


/etc/emulationstation/es_systems.cfg
/opt/retropie/configs/amiga_ntsc/emulators.cfg
/opt/retropie/configs/amiga_ntsc/retroarch.cfg
/home/pi/RetroPie/roms/amiga_ntsc/
/opt/retropie/configs/all/CRT/Resolutions/base_systems.cfg
/opt/retropie/configs/all/CRT/Retroarch/configs/amiga_ntsc.cfg
/opt/retropie/configs/all/CRT/Retroarch/cores/amiga_ntsc-core.cfg
/home/pi/RetroPie-Setup/platforms.cfg
/opt/retropie/configs/all/CRT/bin/GeneralModule/launcher_module/plugins/libretro.py
Hola a todos.

Llevo un tiempo probando retropie-crt y estoy sorprendido de la calidad de la imagen en los arcades y consolas de 8 y 16 bits. No obstante, hoy he instalado amiberry y me metido el famoso "MegaAGS.hdf" (recopilatorio del romset de amiga en formato WHDLOAD con el frontend MegaAGS) y me encuentro con que el menú del juego, y el workbench que hay debajo, se ven "borrosos", cuando el mismo HDF en la MiSTer FPGA con el mismo monitor se vé nítido:

Retropie-CRT:

Imagen
Imagen

MiSTer FPGA en el mismo monitor:

Imagen
Imagen

He estado jugando con las configuraciones (Line: Simple vs Double, resoluciones del dropdown, FullScreen vs Windowed, etc), y no consigo que se vean nítidas las letras y también el Workbench como sí que ocurre cuando ese HDF en la MiSTer en la misma TV.

¿Alguna idea? Gracias.
@compiler Fijate la misma pregunta hice, este problema aún no está resuelto, eso es que la resolución de pantalla no está bien ajustada. En mi caso el menú no se veía nada, resultaba imposible modificar la resolución, no sé si tu tendrás más suerte.

Pero es eso, la resolución está mal configurada, hay que cambiarla.
AxelStone escribió:@compiler Fijate la misma pregunta hice, este problema aún no está resuelto, eso es que la resolución de pantalla no está bien ajustada. En mi caso el menú no se veía nada, resultaba imposible modificar la resolución, no sé si tu tendrás más suerte.

Pero es eso, la resolución está mal configurada, hay que cambiarla.


Hola, gracias por responder. He jugado con prácticamente todos los parámetros del amiberry en la pestaña Display sin conseguir que se arregle. Tocando Width (entre 600 y 720) y Height (entre 400 y 576) no se me "arregla" sino que se descentra o pierdo parte del área de vídeo. He puesto y quitado el "Fix aspect ratio", todas las opciones de Lines y Interlaced Lines, modo Windowed y Full Screen... ya no se me ocurre qué más probar.

Pues siendo así, parece que no se debe de poder usar amiberry en el CRT, y es una lástima porque esta imagen en la MiSTer FPGA, en el mismo CRT, se ve perfecta.
@compiler Pues eso es que algo no está bien en la configuración del propio emulador, quizás haya que definir nuevos modelines compatibles. Se diría que los micros no las tienen todas consigo, fíjate que he probado el RGBuntu y por ejemplo el Atari ST no sale en resolución nativa tampoco. Es como si estuviera en 640x480, pero no se ve desde luego igual a como lo veo en Mistica.

A ver si alguien que haya trasteado con Retropie nos dice cómo se podrían añadir los nuevos modelines.
Hola!

Yo uso esta maravilla de CRT Edition con Pi2JAMMA. Me gustaría poder enchufarle a la raspberry algún mando de Megadrive por USB para poder jugar a los juegos de consola con el mando propio y no utilizar el de la máquina de arcade. Alguien sabe si esto es posible? He probado a enchufar el mando pero no funciona, sólo responden los mandos de la propia máquina recreativa.

Un saludo!
@compiler I think you're supposed to use lr-puae with this image. I tried amiberry too, but lr-puae works surprisingly well, and the image is sharp.
Amplifuzz escribió:@compiler I think you're supposed to use lr-puae with this image. I tried amiberry too, but lr-puae works surprisingly well, and the image is sharp.


Is lr-puae installable from the retropie-setup script? I don't remember seeing it in the Optional or Experimental package list. :-?
compiler escribió:Is lr-puae installable from the retropie-setup script? I don't remember seeing it in the Optional or Experimental package list. :-?


Yes, I think it comes already installed actually, I remember updating it to the last version from the setup script.
Hola buenas una pregunta si yo conecto un disco duro USB externo a la raspberry cómo serían las rutas dónde tengo que meter las rooms los vídeos y las imágenes y demás
@RonyxD Buenas, si no recuerdo mal creo que tendrías que formatear el disco en FAT32 y crear dentro una carpeta llamada 'retropie'. Luego al conectarlo a la Rpi y seleccionar el HDD como almacén de roms, el sistema te crea automáticamente las carpetas necesarias (roms, bios, etc.) dentro de la que habías creado, y allí ya podrías meter tus roms.
Como el sistema es un Retropie, en principio cualquier tutorial que encuentres te podría servir para meter roms, carátulas y demás, porque la estructura de carpetas es la misma.
Un saludo.
Buenas,

Estoy intentando conectar mi Rasperry 3B+ a mi CRT Sony Trinitron con Retropie, VGA666 y cable de retrocables VGA to Scart RGB pero no obtengo imagen, he visto varios sitios donde hablan de diversas maneras de editar el archivo config.txt, alguien me puede decir (un poco para tontos) que tengo exactamente que hacer? Gracias.
Ariakas_135 escribió:Buenas,

Estoy intentando conectar mi Rasperry 3B+ a mi CRT Sony Trinitron con Retropie, VGA666 y cable de retrocables VGA to Scart RGB pero no obtengo imagen, he visto varios sitios donde hablan de diversas maneras de editar el archivo config.txt, alguien me puede decir (un poco para tontos) que tengo exactamente que hacer? Gracias.


¿Usas retropie, o retropie-crt? A mí me fue a la primera con Retropie-CRT y los mismos componentes que comentas, me extraña que Retropie normal te permita conectarla a un CRT...
compiler escribió:
Ariakas_135 escribió:Buenas,

Estoy intentando conectar mi Rasperry 3B+ a mi CRT Sony Trinitron con Retropie, VGA666 y cable de retrocables VGA to Scart RGB pero no obtengo imagen, he visto varios sitios donde hablan de diversas maneras de editar el archivo config.txt, alguien me puede decir (un poco para tontos) que tengo exactamente que hacer? Gracias.


¿Usas retropie, o retropie-crt? A mí me fue a la primera con Retropie-CRT y los mismos componentes que comentas, me extraña que Retropie normal te permita conectarla a un CRT...


Se ve que hay modos pero desconocía que había uno directo, ahora si he podido, muchas gracias
Hi,

I'm french so I will write in english!

First of all thanks for this incredible solution!

I want to add video presentation for the games but it doesn't work.

Here's my code :

<?xml version="1.0"?>
<gameList>
    <game>
        <path>./avsp.zip</path>
        <name>Alien vs. Predator</name>
        <video>./medias/videos/avsp.mp4</video>
    </game>
</gameList>


This gamelist.xml file is located like this :

roms/fba/gamelist.xml

Of course the folders medias and videos are created, like this :

roms/fba/medias/videos

I do something wrong but what ?

Best regards,

Julien
ryosanisback escribió:Hi,

I'm french so I will write in english!

First of all thanks for this incredible solution!

I want to add video presentation for the games but it doesn't work.

Here's my code :

<?xml version="1.0"?>
<gameList>
    <game>
        <path>./avsp.zip</path>
        <name>Alien vs. Predator</name>
        <video>./medias/videos/avsp.mp4</video>
    </game>
</gameList>


This gamelist.xml file is located like this :

roms/fba/gamelist.xml

Of course the folders medias and videos are created, like this :

roms/fba/medias/videos

I do something wrong but what ?

Best regards,

Julien




attention video file (mp4) must be compatible with internal retropie codec.. sometime video mp4 just reeady of anothers set /collections not working..must be re-converted again in mp4 (do tests!!)
jimiz escribió:
ryosanisback escribió:Hi,

I'm french so I will write in english!

First of all thanks for this incredible solution!

I want to add video presentation for the games but it doesn't work.

Here's my code :

<?xml version="1.0"?>
<gameList>
    <game>
        <path>./avsp.zip</path>
        <name>Alien vs. Predator</name>
        <video>./medias/videos/avsp.mp4</video>
    </game>
</gameList>


This gamelist.xml file is located like this :

roms/fba/gamelist.xml

Of course the folders medias and videos are created, like this :

roms/fba/medias/videos

I do something wrong but what ?

Best regards,

Julien




attention video file (mp4) must be compatible with internal retropie codec.. sometime video mp4 just reeady of anothers set /collections not working..must be re-converted again in mp4 (do tests!!)


Yes that was the problem, many thanks :)
Es posible entrar en el menu del vixe y cambiar de connodore 64 a 128?

Le doy a todos los Fs y nada...
Saludos?
Hi,

Small question because I'm not sure.

Where I should put the bios files ?

I know it must be placed in my BIOS folder on my USB key.

But for the neo geo for example, I have the impression it doesn't work. I choose the neogeo.zip bios with unibios and I don't see the region and etc informations on the launching screen of the game.

Roms are place in the neogeo folder.

Best regards,

Julien
ryosanisback escribió:Hi,

But for the neo geo for example, I have the impression it doesn't work. I choose the neogeo.zip bios with unibios and I don't see the region and etc informations on the launching screen of the game.

Julien


neogeo.zip goes in the same directory as the Neo Geo ROMs.
Amplifuzz escribió:
ryosanisback escribió:Hi,

But for the neo geo for example, I have the impression it doesn't work. I choose the neogeo.zip bios with unibios and I don't see the region and etc informations on the launching screen of the game.

Julien


neogeo.zip goes in the same directory as the Neo Geo ROMs.

Thanks, just try it but still not working, weird :-?
1624 respuestas